Cisco XR 12410 User Manual
Page 162

Chapter 4 Troubleshooting the Installation
Troubleshooting the Processor Subsystem
4-32
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
IOS XR
FABW
Cisco IOS XR software is waiting for the fabric to be ready.
RP IOS XR
software
IOS XR
VGET
3
Line card is obtaining the Cisco IOS XR release.
RP IOS XR
software
IOS XR
RUN
Line card is enabled and ready for use.
RP IOS XR
software
IOS XR
STRT
Cisco IOS XR software is being launched.
RP IOS XR
software
IOS XR
TRAN
Cisco IOS XR software is transitioning to active.
RP IOS XR
software
IOS XR
UP
Cisco IOS XR software is running.
RP IOS XR
software
1.
The LED initialization sequence shown in
may occur too quickly for you to read; therefore, the sequence is
provided in this tabular form as a baseline for how a line card should function at startup.
2.
The fabric downloader loads the Cisco IOS XR software image onto the line card.
3.
This LED sequence only appears in Cisco IOS XR OL-17441-01 or later.
Table 4-8
Troubleshooting Using Other Alphanumeric Display Messages
Display
Meaning
Source
MAL
FUNC
Line card malfunction reported by field diagnostics.
RP
MISM
ATCH
1
Line card type mismatch in paired slots.
RP
PWR
STRT
Line card is newly powered on.
RP
PWR
ON
Line card is powered on.
RP
IN
RSET
System is resetting.
RP
Table 4-7
Troubleshooting Using Alphanumeric Display Messages (continued)
Display
1
Meaning
Source