Dell PowerEdge 1750 - Manual (Page 46)

14. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
15. Open the system. See " Opening the System Covers ."
16. Replace processor 1 with another processor of the same capacity. See " Installing Microprocessors " in "Installing System Options."
17. Close the system. See " Closing the System Covers ."
18. Run Quick Tests in the system diagnostics. See " Running the System Diagnostics ."
If the tests complete successfully, replace processor 1. See " Getting Help ."
19. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
20. Open the system. See " Opening the System Covers ."
21. Reinstall processor 2. See " Installing Microprocessors " in "Installing System Options."
22. Close the system. See " Closing the System Covers ."
23. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
24. Run Quick Tests in the system diagnostics. See " Running the System Diagnostics ."
If the tests fail or the problem persists, see " Getting Help ."
Back to Contents Page