beautypg.com

Network cable requirements, Table b – Dell PowerEdge 1750 User Manual

Page 10

background image

 

Table B-7. NIC Connector Pin Assignments 

Network Cable Requirements

 

The NIC supports a UTP Ethernet cable equipped with a standard RJ45-compatible plug. Observe the following cabling restrictions.

 

l

 

Use Category 5 or greater wiring and connectors.

l

 

Do not exceed a cable run length (from a workstation to a hub) of 100 m (328 ft).

 

For detailed guidelines on operation of a network, see "Systems Considerations of Multi-Segment Networks" in the IEEE 802.3 standard.

 

Back to Contents Page

 

Pin Signal I/O Definition

1

TP0+

I/O Data0 (+)

2

TP0–

I/O Data0 (–)

3

TP1+

I/O Data1 (+)

4

TP2+

I/O Data2 (+)

5

TP2–

I/O Data2 (–)

6

TP1–

I/O Data1 (–)

7

TP3+

I/O Data3 (+)

8

TP3–

I/O Data3 (–)

NOTICE:

To avoid line interference, voice and data lines must be in separate sheaths.