Dell PowerEdge 6950 - Manual (Page 18)

18
About Your System
E122B 0.9V Over
Voltage
0.9 V regulator voltage has
exceeded the allowable voltage
range See "Getting Help" on page 129.
E122C CPU Power Fault A voltage regulator failure was
detected when the processor
regulator(s) was enabled See "Getting Help" on page 129.
E122D CPU # VDDIO Processor # VDDIO voltage has
exceeded the allowable voltage
range See "Getting Help" on page 129.
E122E CPU # VDDA Processor # VDDA voltage has
exceeded the allowable voltage
range See "Getting Help" on page 129.
E1310 RPM Fan ## RPM of specified cooling fan is
out of acceptable operating range. See "Troubleshooting System
Cooling Problems" on page 105.
E1313 Fan Redundancy One or more cooling fans has
failed. Cooling fan redundancy
has been lost. See "Troubleshooting System
Cooling Problems" on page 105.
E1410 CPU # IERR Specified microprocessor is
reporting a system error. See your system’s Information
Update Tech Sheet located on
support.dell.com for the most
current system information. If the
problem persists, see "Getting
Help" on page 129.
Table 1-7. LCD Status Messages (continued)
Line 1
Message Line 2
Message Causes Corrective Actions