Installing pci and pci express cards – Dell XPS 600 User Manual
Page 91
Removing and Installing Parts
91
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent
the computer cover from closing properly or cause damage to the equipment.
6 Press the retention arm into place, securing the card(s) in the computer.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug
the cable into the computer.
7 Replace the
computer cover
, reconnect the computer and devices to electrical outlets, and
then turn them on.
8 If you removed a sound card or a network adapter, see "Network Adapter and Sound Card
9 Uninstall the driver for the card that you removed.
Installing PCI and PCI Express Cards
NOTICE:
If you have or are upgrading to the optional dual-graphics configuration, see "Installing PCI
Express Graphics Cards in a Dual Configuration" on page 86 to install a graphics card.
1 Follow the procedures in "Before You Begin" on page 69.
2 Press the lever on the card retention arm and raise the retention arm.
alignment bar
alignment guide
retention arm
filler bracket