Dell XPS 600 - Manual (Page 89)

Removing and Installing Parts
89
NOTICE:
An incorrectly attached graphics power cable may result in degraded graphics performance.
10 Connect the power cable to the power connector on the card.
For information about the card cable connections, see the documentation that came with the
card.
11 Replace the graphics card bridge, pressing firmly so that it completely covers the connector
tabs.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug
the cable into the computer.
12 Replace the computer cover, reconnect the computer and devices to electrical outlets, and
then turn them on.
Removing PCI and PCI Express Cards
NOTICE:
If you have the optional dual-graphics configuration, see "Removing a PCI Express Graphics
Card from a Dual Configuration" on page 84 to remove or replace a graphics card.
1 Follow the procedures in "Before You Begin" on page 69.
2 Press the lever on the card retention arm and raise the retention arm.
graphics card bridge
dual-PCI Express
graphics cards
power connectors (2)