Dell XPS 600 - Manual (Page 106)

106
Removing and Installing Parts
www
.dell.com | support.dell.com
4 Disconnect the USB cable on the back of the media card reader to the internal USB
connector on the system board.
5 Press in on the tabs on each side of the media card reader and slide the card reader out of the
adapter.
6 Close the computer (see "Closing the Computer Cover" on page 125).
Installing a Media Card Reader
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer’s electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.
1 Follow the procedures in "Before You Begin" on page 69.
2 Lay the computer on its side so that the system board is on the bottom of the inside of the
computer.
cable
media card reader*
*
Not present on all computers.
internal USB
connector
tabs (2)