Dell PowerEdge C6145 - Manual (Page 86)

86 | Using the System Setup Program
Option Description
Hyper Terminal on remote side will be discontinued
when + key is pressed. But onboard NIC
PXE Option ROM Configuration is also set when
+ key is pressed. Suggest user change the
“Setup Key Stroke” to + in PXE
OPROM Configuration. The Hyper Terminal on
remote side will be discontinued when +
key is pressed.
Redirection After BIOS
POST
(Always default) Disabled: Turns off the redirection after POST.
Always: Redirection is always active. (Some operating
systems may not work if set to Always.)
Terminal Type
(ANSI default) Select the target terminal type.
VT-UTF8 Combo Key
Support
(Enabled default) Enables or disables VT-UTF8 combination key support
for ANSI/VT100 terminals.