Dell PowerEdge C6145 - Manual (Page 54)

54 | Using the System Setup Program
Option Description
Module Version Displays the current processor module version.
Node Count Displays the node count.
Core Count Displays the processor core count.
Revision Displays the processor version.
Cache L1 Displays the size of CPU L1.
Cache L2 Displays the size of CPU L2.
Cache L3 Displays the size of CPU L3.
Speed Displays the frequency of CPU.
Able to Change Freq. Displays the capability of frequency change.
uCode Patch Level Displays the ucode patch level.
Power Management This field sets the system Power Management to
Maximum Performance mode, OS Control mode, or
Advanced Platform Management Link mode. When set
to APML mode, you can change setting of PSU Power
Capping options.
Secure Virtual Machine
Mode
(Enabled default) Select this item to enable or disable the function of
securing virtual machine mode (SVM).
C1E Support
(Enabled default) Select this item to enable or disable the “Enhanced Halt
State”.
CState Mode
(C6 default) Specifies the method of C-State enablement. Only for
Family 15h CPU.
CPB Mode (Turbo Mode)
(Disabled default) Specifies the method of core performance boost
enablement. Only for Family 15h CPU.
CPU DownCore Mode
(All default) Select this item to cold reset the system after options are
changed.
ACPI SRAT Table
(Enabled default) Select this item to enable or disable the building of ACPI
SRAT table.