Dell PowerEdge RAID Controller 6E - Manual (Page 35)

About PERC 6 and CERC 6/i Controllers
35
NOTE:
The total number of physical disks in a disk group cannot exceed 32.
NOTE:
You cannot perform RAID level migration and expansion on RAID
levels 10, 50, and 60.
RAID 5 RAID 0 3 or more 2 or more Yes Converting to a non-redundant
virtual disk and reclaiming disk
space used for distributed
parity data.
RAID 5 RAID 6 3 or more 4 or more Yes At least one drive needs to be
added for dual distributed
parity data.
RAID 6 RAID 0 4 or more 2 or more Yes Converting to a non-redundant
virtual disk and reclaiming disk
space used for distributed
parity data.
RAID 6 RAID 5 4 or more 3 or more Yes Removing one set of parity data
and reclaiming disk space used
for it.
Table 3-2. RAID Level Migration (continued)
Source
RAID
Level Target
RAID
Level Required
Number of
Physical
Disks
(Beginning) Number of
Physical
Disks
(End) Capacity
Expansion
Possible Description
Dell_PERC6.2_UG.book Page 35 Wednesday, June 24, 2009 6:08 PM