Dell PowerEdge RAID Controller 6E - Manual (Page 73)

Driver Installation
73
Upgrading the Kernel
When upgrading to a new kernel, you must reinstall the DKMS-enabled
driver packages. Perform the following steps to update or install the driver for
the new kernel:
1 In a terminal window, type the following:
dkms build -m -v
-k
dkms install -m -v
-k
2 To check whether the driver is successfully installed in the new kernel, type:
dkms status
You see a message similar to the following one:
, ,
version>: installed
3 If the previous device driver is in use, you must reboot the system for the
updated driver to take effect.
Dell_PERC6.2_UG.book Page 73 Wednesday, June 24, 2009 6:08 PM