Dell PowerEdge RAID Controller 6E - Manual (Page 76)

76
Driver Installation
4 From the screen that displays, go to the Storage Adapter screen to install
the MegaRAID SAS driver.
5 Delete any existing RAID adapter listings.
6 Press to add unlisted drivers.
7 Press again.
A path is displayed.
8 Press .
9 Insert the driver diskette in the diskette drive, and press .
The system finds the .HAM driver.
10 Press .
11 Select the Driver Summary screen, and press .
12 Continue the Novell NetWare installation procedure.
Installing or Updating the NetWare Driver in an Existing NetWare System
Perform the following steps to add the Novell NetWare driver to an existing
installation:
1 At the root prompt, type
hdetect and press .
The Configuration Options screen is displayed.
2 From the screen that displays, go to the Storage Adapter screen to install
the MegaRAID SAS driver.
3 Delete any existing RAID adapter listings.
4 Press to add unlisted drivers.
5 Press again.
A path is displayed.
6 Press .
7 Insert the driver diskette in the diskette drive, and press .
The system finds the .HAM driver.
8 Press .
9 Select the Driver Summary screen, and press .
10 Continue the Novell NetWare installation procedure.
Dell_PERC6.2_UG.book Page 76 Wednesday, June 24, 2009 6:08 PM