Using the system password feature – Dell PowerVault 735N (Rackmount NAS Appliance) User Manual
Page 83
Using the System Setup Program: Dell PowerVault 735N Systems Service Manual
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/setup.htm[3/15/2013 4:18:21 PM]
SCSI
Channel A
Channel B
When SCSI is set to On, Channel A and Channel B display SCSI. When SCSI is
set to Off, Channel A and Channel B display Off.
IDE
Controls integrated IDE CD-ROM drive controller operation. If IDE is set to Auto
and the system detects a drive controller card installed, the integrated IDE
controller is disabled. If a drive controller card is not detected, the integrated IDE
controller is enabled. When IDE Controller is set to Off, the integrated IDE
controller is always disabled.
System Data:
These fields display information about the system and are not selectable.
Level 2
Cache
Displays the size of the integrated cache. This field has no user-selectable
settings.
System
Memory
Displays the amount of installed and detected memory, except for memory on
EMS expansion cards.
Video
Memory
Displays the amount of installed and detected video memory.
Service
Tag
Displays the 5- or 7-character service tag number programmed into NVRAM.
Asset Tag
Displays the programmable asset tag number (if assigned).
Using the System Password Feature
NOTICE: The password features provide a basic level of security for the data on your system.
However, they are not foolproof. If your data requires more security, it is your responsibility to obtain
and use additional forms of protection, such as data encryption programs.
NOTICE: Dell recommends that the system password be left in the "Not Enabled" (default) setting.
When your system operates in a headless configuration, you cannot input a system password to
reboot the system.
Your Dell system is shipped to you without the system password feature enabled. If system security is a
concern, you should attach a keyboard, monitor, and mouse to your system and enable password protection.
whenever you use the System Setup program. After a system password
is assigned, only those who know the password have full use of the system.
When the System Password option is set to Enabled, the system prompts you for the system password just
after the system boots.