Specifications – Dell OptiPlex 160L User Manual
Page 105
Back to Contents Page
Specifications
Dell™ OptiPlex™ 160L User's Guide
Microprocessor
Microprocessor type
Intel® Pentium® 4 and Celeron®; design provides
for future Dell-supported upgrades.
Level 1 (L1) cache
8 KB
Level 2 (L2) cache
128-KB or 512-KB (depending on your computer
configuration) pipelined-burst, eight-way set
associative, write-back SRAM
Memory
Type
266- and 333-MHz DDR SDRAM
Memory connectors
Two
Memory capacities
128-, 256-, 512-MB, or 1-GB non-ECC
Minimum memory
128 MB
NOTE:
Between 1 and 64 MB of system memory may
be allocated to support graphics, depending on
system memory size and other factors.
Maximum memory
2 GB
BIOS address
F0000h
Computer Information
Chip set
Intel 845GV
Data bus width
64 bits
Address bus width
32 bits
DMA channels
Seven
Interrupt levels
24
BIOS chip
4-Mb
Network
Network Controller
Integrated 10/100 Ethernet
Video
Type
Integrated Intel 3D Extreme Graphics
Audio
Type
AC97, Sound Blaster emulation
Stereo conversion
16-bit analog-to-digital; 20-bit digital-to-analog
Expansion Bus
Bus type
PCI
Bus speed
33 MHz
PCI
connector
Three
connector size
120 pins
connector data width (maximum)
32 bits
bus protocols
4x/2x modes at 1.5 V
Drives
Internally accessible drives
Two bays for 1-inch-high IDE hard drives
Externally accessible drives
One bay for a floppy drive
Two bays for CD/DVD drives
Connectors
External connectors:
Serial
9-pin connector; 16550C-compatible