Dell PowerEdge R900 - Manual (Page 63)

Installing System Components 63
1 Press the drive blank release in the direction of the arrow.
2 Pry the ends of the blank outward until the blank is free.
For 2.5-inch hard drive configurations, remove the blank as you would the
2.5-inch hard drive carrier:
1 Open the drive blank release handle to release the blank. See Figure 3-3.
2 Slide the drive blank out until it is free of the drive bay.
Figure 3-3. Removing a Drive Blank
Installing a Drive Blank
The process for installing a drive blank depends on whether your system is
configured with 3.5-inch or 2.5-inch hard drives.
1 Release handle
1