Dell PowerEdge R900 - Manual (Page 44)

44 Using the System Setup Program
NOTE: The options for the System Setup program change based on the system
configuration.
NOTE: The System Setup program defaults are listed under their respective
options, where applicable.
Table 2-2. System Setup Program Options
Option Description
System Time Set up the system time
System Date Set up the system date
Memory Information Set up the memory configuration. See
"Memory Information Screen" on page 45.
CPU Information Set up the processor configuration. See
"CPU Information Screen" on page 45.
Boot Sequence Set up the boot device sequence
USB Flash Drive Emulation Type Set up Virtual Floppy as Auto / Floppy /
Hard disk
Boot Sequence Retry Enabled / Disabled
Integrated Devices Set up Integrated Devices. See "Integrated
Devices Screen" on page 46.
PCI IRQ Assigment View IRQ assignments. See "PCI IRQ
Screen" on page 47.
Serial Communication Set up Serial Communication parameters.
See "Serial Communication Screen" on
page 47.
Embedded Server Management Set up Embedded Server Management.
See "Embedded Server Management
Screen" on page 48.
System Security Set up the system security. See "System
Security Screen" on page 48.
Keyboard NumLock Enabled / Disabled
Report Keyboard Errors Report / No Report