Dell PowerEdge 2600 - Manual (Page 55)

7. Replace the ERA/O card (see " Installing a Replacement ERA/O Card ").
8. Replacing the cooling shroud (see " Replacing the Cooling Shroud ").
9. Replace the cooling fans (see " System Fans ").
10. Replace the power supplies (see " Replacing a Power Supply ").
11. Replace the cover (see " Replacing the Cover ").
12. Replace all other cables removed when the system board was removed (intrusion alarm cable, control panel cable, IDE cable for the CD/diskette drive,
and the power and interface cables from the power distribution module).
13. Reconnect the system to its electrical outlet(s) and turn the system on, including any attached peripherals.
Back to Contents Page