Dell KVM 2162DS - Manual (Page 29)

Basic Software Operation xxx | xxx 29
Figure 3.2: Product Type Dialog Box
3 Select a Vendor. For each vendor, the supported product names appear in
the Product list. Select a product.
If the Remote Console Switch model you wish to add is not available
in the Product list, select Other. Once this switch is discovered, it will
be available in the Product list the next time you add a Remote
Console Switch.
NOTE: Each dialog box in the New Remote Console Switch Wizard indicates
the type of switch you have selected from the Product list.
4 Click Next.
5 You are prompted to indicate whether the Remote Console Switch has an
assigned IP address or not. Click Yes and then click Next.