Dell PowerEdge 2450 - Manual (Page 96)

9-4 Dell PowerEdge 2450 Systems Installation and Troubleshooting Guide
5. Loosen the thumbscrew at the back corner of the peripheral cage (see
Figure 9-3).
6. Slide the peripheral cage toward the back of the system approximately 2.5 cm
(one inch), then lift the peripheral cage upwards and set it aside.
system board
interface cable
connector (P1) interposer board
power cable
connector (P3)
cooling fans
wiring harness
connector (P2)
control panel
cable connector
diskette drive/CD-ROM
drive interface connector
thumbscrew
peripheral cage
drive