Dell PowerEdge 2450 - Manual (Page 24)

3-8 Dell PowerEdge 2450 Systems Installation and Troubleshooting Guide
Faulty diskette or hard-disk drive Replace the diskette or hard-disk
drive.
!,
Defective system board Replace the system board. See
Chapter 11, “Getting Help,” for
instructions on obtaining technical
assistance.
Improperly attached interface
cables Check the primary and secondary
SCSI interface cable connections
to the backplane board. See
Chapter 10, “Installing Hard-Disk
Drives.”
Improperly attached or missing
backplane Check the interface cable connec-
tions to the backplane board. See
Chapter 10, “Installing Hard-Disk
Drives.”
1
Defective battery or faulty chip
(defective system board) Replace the system battery. If the
problem persists, replace the sys-
tem board. See Chapter 11,
“Getting Help,” for instructions
on obtaining technical assistance.
1
'1"+
Incorrect Time or Date settings
or defective system battery Check the Time and Date set-
tings. See Chapter 4, “Using the
System Setup Program,” in the
User's Guide for instructions. If
the problem persists, replace the
system battery. If the problem
still persists, replace the I/O
board. See Chapter 11, “Getting
Help,” for instructions on obtain-
ing technical assistance.
1!
Defective system board Replace the system board. See
Chapter 11, “Getting Help,” for
instructions on obtaining technical
assistance.
NOTE: For the full name of an abbreviation or acronym used in this table, see “Abbreviations and Acronyms."