Compaq DESKPRO 1000 - Manual (Page 64)

5-22 Removal and Replacement Procedures
5.17 Bezel Blank
1. Perform preparation procedures (Section 5.4).
2. Remove the system unit cover (Section 5.5).
3. Remove the front bezel (Section 5.13).
4. With the front bezel in an upright position, press the tabs on the side of the bezel blank towards
the center of the blank and push the bezel blank out of the front of the bezel.
Figure 5-18. Removing the Bezel Blank
To replace the bezel blank, reverse the previous procedure.