Compaq DESKPRO 1000 - Manual (Page 45)

Compaq Deskpro 1000 Series of Personal Computers 5-3
5.3 Feet
Four rubber feet are mounted to the underside of the base pan. No parts have to be removed to
access the feet. The replacement feet have an adhesive surface and are shipped with a protective
strip in place.
Remove the feet and clean the metal with a clean, dry cloth. Remove the protective strip from the
replacement feet before installation.
Figure 5-2. Installing the Feet
5.4 Preparation for Disassembly
1. Remove any diskette, compact disc or tape from the computer.
2. Turn off the computer and any peripheral devices connected to it.
CAUTION: The computer power switch should be turned off before you disconnect any cables.
3. Disconnect the power cord from the electrical outlet and then from the computer.
4. Disconnect all peripheral devices from the computer.
✎
During disassembly, label each cable as you remove it, noting its position and
routing.