Compaq DESKPRO 1000 - Manual (Page 63)

Compaq Deskpro 1000 Series of Personal Computers 5-21
5.16 Power Button
1. Perform preparation procedures (Section 5.4).
2. Remove the system unit cover (Section 5.5).
3. Remove the front bezel (Section 5.13).
4. From the rear of the front bezel, depress the tabs on each side of the power button; the button
with its spring will come out of the front of the bezel.
Figure 5-17. Removing the Power Button
To replace the power button, reverse the previous procedure.