Acronis Access - User Guide User Manual

Page 14

2. Tap the App Password option.
3. Turn ON the App Password.
4. Enter an application password and confirm it, then tap OK.
5. Set the Require option. This setting determines how long you can leave Acronis Access and not

have to enter your password upon returning.

To change your current application password tap Change Password, which is available after a Acronis
Access app password has been configured. If you change your application password, you will be
prompted to enter your current password before you enter the new one.

If your client management policy requires an application password to be set, follow these steps:

1. After initiating Acronis Access Client Management setup, Acronis Access will prompt you to

create a password.

2. Enter and confirm a password, then tap OK.
3. If your password does not meet the policy's complexity requirements, you will be prompted to

enter a new password.

4. To later change your current application password, tap the Change Password option. If you

change your application password, you will be prompted to enter your current password before
you enter the new one.

The system administrator may require a password to be set by the application user and entered any
time the Access Mobile Client application is started. If your Access Mobile Client app is managed and
an application password is required by your system administrator, the App Password setting cannot
be disabled from the Access Mobile Client application.