Baumer TA1220 - Manual (Page 22)

TA1220
22 www.baumer.com
3.2 Inputs and outputs
Signal input
Specification
PNP High level >2.6 V
Low level <2.4 V
Input resistance 1.5 kΩ
NPN High level >2.6 V
Low level <2.4 V
Input resistance 3.9 kΩ
TTL High level >2.6 V
Low level <2.4 V
NAMUR Ion <1 mA, Ioff >3 mA
Input resistance 1.5 kΩ
Magnetic sensor Vin >30 mVeff at 60 Hz
Vin >300 mVeff at 6 kHz
Contact Input resistance 3.9 kΩ
Voltage 10...600 VAC Measuring the frequency of the
voltage
Relay outputs (SET 1, SET 2)
Switching voltage max. 250 VAC / 110 VDC
Switching current max. 1 A
Switching performance max. 150 VA / 30 W
3.3 Voltage supply connection
There are several options for operation supply. Power supply must
be fed in via the recommended external fuse.
Operating voltage External protection
85...265 VAC, (50/60 Hz) and 100...300 VDC M 100 mA
21...53 VAC, (50/60 Hz) and 10.5...70 VDC M 1 A