Edge Lighting Vessel 6 - Manual (Page 2)

2
D 7:
8: Connect the fixture blue wire to the neutral power wire
with a wire nut.
9: Connect the fixture brown wire to the hot power wire with
a wire nut.
Make sure that the canopy is grounded in accordance
with local electrical codes.
9
8
7
10: Place all wire and wire nut connections inside the electrical
box.
11: Mount the crossbar assembly to the electrical box holes
with the provided #8-32 screws.
G
14: Screw the lamp completely into the socket.
CANOPY
ELECTRICAL
BOX
E ELECTRICAL
BOX
#8-32
SCREWS
CROSSBAR
ASSEMBLY
10
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
Use MAX 40 Watt Type E14 base, torpedo style
candelabra lamp.
LAMP
SHADE
SOCKET
14
CROSSBAR
ASSEMBLY
STRAIN RELIEF
CANOPY
STRAIN RELIEF
11
F 12: Slide the canopy into the crossbar assembly nipple and
secure using the strain relief.
13: Slightly tighten the plastic screw on the strain relief to avoid
the cord from sliding down.
ELECTRICAL
BOX
STRAIN RELIEF
PLASTIC
SCREW
CORD
CROSSBAR
ASSEMBLY
NIPPLE
13
12
CANOPY