Edge Lighting Fast Jack 17 Port Canopies Without Transformers - Manual (Page 2)

2
D
MOUNTING PLATE
4
4: Mark the three mounting plate holes on the ceiling.
5: Tap the anchors through the mounting plate holes onto the
marked point up to the threaded portion with a hammer.
6: Screw in the threaded portion of the anchors with a Phillips
screwdriver.
E
MOUNTING PLATE
ANCHOR
6
6
5
F
MOUNTING PLATE
WASHER
#8 SCREW
7
7
7
7: Secure the mounting plate to the anchors with the provided
#8 screws and washers.
G
8
SAFETY
CABLE
SAFETY BRACKET
CANOPY
MOUNTING
PLATE
8: Insert one end of the safety cable into the safety bracket of
mounting plate and the other end into the canopy safety
bracket.