Edge Lighting Tower of Crystal Love - Manual (Page 3)

3
G
1: OPTIONAL: Carefully slide the crystal disk onto the spring
loops.
Install the Crystal Accessory (sold separately) & Lamp
SPRING LOOP
1
CRYSTAL DISK
1
NOTE: Omit steps, 1 through 3 when no crystal accessory is used.
H
2: Lift the glass shade up, to expose the socket assembly.
3: Slide the threaded spacer through the spring frame and
tighten onto the socket assembly.
SOCKET
ASSEMBLY
GLASS SHADE
SPRING FRAME
THREADED
SPACER
3
2
I
4: Push the lamp pins completely into the socket holes..
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
Use MAX 35 Watt, Type Bi-Pin Halogen Lamp.
NOTE: Use a soft cloth and fingers to install the lamp.
COAXIAL CABLE
SOCKET ASSEMBLY
GLASS SHADE
4
LAMP