Humboldt 5000 BLU Light Weight Deflectometer - Manual (Page 52)

52
TIME ZONE MENU
GMT + 00 : 00 h
DI 30/06/13 16:41:49
EXIT – +
MAIN MENU
GPS / TIME MENU
USB STICK
LANGUAGE
GPS / TIME
INTERNAL MEMORY
SERVICE
EXIT SET
→
GPS IS ON
SUMMER TIME IS ON
TIME IS GPS TIME
TIME ZONE
EXIT SET
→
→
→
7.5.7 Time Zones
The testing computer is delivered with the time zone set to ‘GMT + 01:00 h’
(GMT = Greenwich Mean Time). This setting corresponds to Central
European Winter Time, imported via the corresponding satellites by the
GPS receiver. Central European Summer Time can be set separately; it
corresponds to the time zone set-up ‘GMT + 02:00 h’.
PAY ATTENTION TO YOUR TIME ZONE IN RELATION TO THE GMT
IMPORTED BY THE TESTING COMPUTER. ADJUST THE DIFFERENCE
IN THE ‘TIME ZONE’ MENU BEFORE FIRST USE OF THE DEVICE.
The testing computer will remember the set time zone, even if it is
subsequently switched to a manual time setting.
The automatic time zone mode is active only, when the device is set to
‘TIME IS GPS TIME’.
7.5.8 Time Zone Set-up
Turn on the device by pressing the ‘START’ button. Then enter the ‘MAIN
MENU’ by pressing the ‘SELECT’ button. Use the ‘SELECT’ button to
move the arrow and select ‘GPS / TIME’ from the menu. Press the ‘START’
button (SET) to enter the ‘GPS / TIME’ menu.
Use the ‘SELECT’ button to move the arrow and select ‘TIME ZONE’ from
the menu. Press the ‘START’ button (SET) to enter the ‘TIME ZONE’
menu.
Use the ‘START’ (+) and ‘SELECT’ (-) buttons to set the desired time zone
in relation to Greenwich Mean Time. Confirm the chosen time zone by
pressing the ‘RESET/OFF’ button (EXIT); you will be automatically returned
to the ‘GPS / TIME’ menu.
Press the ‘RESET/OFF’ button (EXIT) to return to the ‘MAIN MENU’. Press
the ‘RESET/OFF’ button (EXIT) again to return to the ‘STATUS REQUEST’.
Pressing the ‘START’ button will start the test procedure.