Humboldt 5000 BLU Light Weight Deflectometer - Manual (Page 50)

50
D I 3 0 / 0 6 / 1 3 1 5 : 5 0 : 2 2
OK
OK
6 , 3 V
MAIN MENU
GPS / TIME MENU
USB STICK
LANGUAGE
GPS / TIME
INTERNAL MEMORY
SERVICE
EXIT SET
→
GPS IS ON
SUMMER TIME IS ON
TIME IS GPS TIME
TIME ZONE
EXIT SET
→
GPS IS ON
SUMMER TIME IS OFF
TIME IS GPS TIME
TIME ZONE
→
EXIT SET
MAIN MENU
GPS / TIME MENU
USB STICK
LANGUAGE
GPS / TIME
INTERNAL MEMORY
SERVICE
EXIT SET
→
GPS IS ON
SUMMER TIME IS ON
TIME IS GPS TIME
TIME ZONE
EXIT SET
→
GPS IS OFF
SUMMER TIME IS ON
TIME IS GPS TIME
TIME ZONE
→
EXIT SET
→
→
→
GPS icon is missing: GPS is off
7.5.3 GPS ON / GPS OFF
Turn on the device by pressing the ‘START’ button. Then enter the ‘MAIN
MENU’ by pressing the ‘SELECT’ button. Use the ‘SELECT’ button to
move the arrow and select ‘GPS / TIME’ from the menu. Press the
‘START’ button (SET) to enter the ‘GPS / TIME’ menu.
To deactivate the GPS reception, position the arrow on ‘GPS IS ON’ and
press the ‘START’ button (SET). ‘GPS IS OFF’ will then show on the
display. If the GPS system is deactivated, the GPS icon will be absent
from the ‘STATUS REQUEST’ screen.
If the GPS reception is switched off, and you would like to re-activate it,
proceed as described above. After activating the GPS reception the GPS
icon will appear during ‘STATUS REQUEST’. Press the ‘RESET/OFF’
button (EXIT) to return to the ‘MAIN MENU’. Press the ‘RESET/OFF’ but-
ton (EXIT) again to return to the ‘STATUS REQUEST’. The chosen GPS
status will be shown either by the presence or by absence of the GPS
icon, depending on whether you have chosen ‘GPS IS ON’ or ‘GPS IS
OFF’. Pressing the ‘START’ button will start the test procedure.
7.5.4 Summer Time Function
Turn on the device by pressing the ‘START’ button. Then enter the ‘MAIN
MENU’ by pressing the ‘SELECT’ button. Use the ‘SELECT’ button to
move the arrow and select ‘GPS / TIME’ from the menu. Press the
‘START’ button (SET) to enter the ‘GPS / TIME’ menu.
To deactivate the summer time, position the arrow on ‘SUMMER TIME IS
ON’ and press the ‘START’ button (SET). ‘SUMMER TIME IS OFF’ will
then show on the display.
To activate the summer time, position the arrow on ‘SUMMER TIME IS
OFF’ and press the ‘START’ button (SET). ‘SUMMER TIME IS ON’ will
then show on the display. Press the ‘RESET/OFF’ button (EXIT) to return
to the ‘MAIN MENU’. Press the ‘RESET/OFF’ button (EXIT) again to
return to the ‘STATUS REQUEST’. Pressing the ‘START’ button will start
the test procedure.