Analysis table options – Bio-Rad Image Lab™ Software User Manual
Page 93
Displaying Data
User Guide | 93
Analysis Table Options
Numerical data associated with an analysis can be viewed in an analysis table. Data
from the Lane and Band analysis can be viewed in the Lane and Band Table tab. If
volume analysis was performed, these data can be viewed in the Volume Table tab.
The buttons above the table provide options for displaying and exporting analysis
table data.
To change the size of the Analysis Table window
Move your cursor to the top of the window until it changes into a
double-headed arrow. Click and drag the edge of the window until you can see
all of the data.
Note: Resizing the Analysis Table window is restricted when a protocol window
is open.
Display Data Options
The Display Data Options dialog box has three tabs.
Measurements — enables you to choose the measurements to display in
the table. Use the arrows to move the columns between the Not Displayed