Bio-Rad Image Lab™ Software - Manual (Page 11)

Instrument Safety Warnings
User Guide | 11
Instrument Safety Warnings
Notes, cautions, and warnings are used to highlight certain operating procedures
and recommendations. The table below describes how each is used in this
document.
Table 1. Notes, Cautions, and Warnings
Icon Meaning
Note: Note: A note indicates a special procedure, an exception to normal
operation, or something else of specific interest to the reader. Notes are
preceded by the word Note.
Caution: A caution precedes an operational step that could damage the
instrument or destroy data unless the operator takes certain precautions.
Cautions located in the main text are preceded by the word Caution and are
accompanied by the caution symbol in the left margin.
Caution: With the exception of cleaning or replacing light bulbs, refer all
servicing to qualified Bio-Rad personnel or their agents. If you experience
technical difficulties with the instrument, contact Bio-Rad to schedule
service. The instrument should not be modified or altered in any way.
Alteration voids the manufacturer’s warranty and might create a potential
safety hazard for the user.
Caution: If the case interlock is defeated, there is a possibility of UV-B
radiation hazard due to UV-B light exposure. Exercise caution when
servicing the instrument.
Caution: Bio-Rad is not responsible for any injury or damage caused by the
use of this instrument for purposes other than that for which it is intended, or
by the modification of this instrument when not performed by qualified
Bio-Rad personnel or their agents.
Caution: Disconnect the AC power cord before removing the instrument
cover.
Warning: A warning precedes an operating procedure that could cause
injury to the operator if not followed correctly. Warnings located in the main
text are preceded by the word Warning and are accompanied by the
warning symbol in the left margin.
Warning: This instrument must be connected to an appropriate AC voltage
outlet that is properly grounded.