Bio-Rad Image Lab™ Software - Manual (Page 10)

| Safety and Regulatory Compliance
10 | GS-900 Calibrated Densitometer with Image Lab Software
General Precautions
 Read the user guide carefully.
 The instrument must be used only for the intended purpose of gel
documentation in research laboratories.
 The instrument must be connected to a grounded power source line and
protected by a circuit breaker.
 Do not pour liquids directly on or inside the instrument.
 Switch off all lights on the instrument immediately after use.
 Clean the transilluminator sample area after use.
Regulatory Notices
The GS-900 densitometer is designed and certified to meet EN 61010, the
internationally accepted electrical safety standard, EMC regulations, and TUV
requirements. Certified products are safe to use when operated in accordance with
this user guide. Do not modify or alter this instrument in any way. Modification or
alteration of this instrument will:
 Void the manufacturer’s warranty
 Void the regulatory certifications
 Create a potential safety hazard
WARNING! Bio-Rad Laboratories, Inc. is not responsible for any injury or
damage caused by use of this instrument for purposes other than those for
which it is intended or by modifications of the instrument not performed by
Bio-Rad Laboratories, Inc., or an authorized agent.