4 sample preparation, 5 running conditions – Bio-Rad Criterion™ TBE-Urea Precast Gels User Manual
Page 28

22
Technical Support: 1-800-4BIORAD • 1-800-424-6723 • www.bio-rad.com
7.4 Sample Preparation
1. Determine the appropriate concentration of sample to load (depends on the load volume and the
detection method used).
2. Dilute the sample with at least an equivalent volume of sample buffer.
For example, combine:
5 μl sample
5
μl
sample
buffer
10
μl
total
volume
7.5 Running Conditions
Power conditions (stepwise)
100 V constant 60 min
250 V constant 60 min
500 V constant 30 min
Starting current
5–25 mA/gel
Final current
5–25 mA/gel
Run time
150 min
Criterion Precast Gels
This manual is related to the following products:
- Criterion™ TBE Precast Gels Criterion™ Cell Criterion Precast Gels Criterion Dodeca Cell 2-D Electrophoresis Workflow Criterion™ IEF Precast Gels Criterion™ Zymogram Precast Gels Criterion™ XT Tris-Acetate Precast Gels Criterion™ Tris-Tricine Precast Gels Criterion™ XT Bis-Tris Precast Gels Criterion Stain Free™ Tris-HCl Gels Criterion™ Tris-HCl Precast Gels Criterion™ TGX Stain-Free™ Precast Gels Criterion™ TGX™ Precast Gels