Baseline Systems BaseStation 3200 - Manual (Page 40)

BaseStation 3200 Advanced Irrigation Controller Manual
Wireless Rain Sensors
Another popular accessory is a wireless rain sensor. Wireless sensors differ from standard rain sensors because
they require external power, typically 24 VAC.
The various types of wireless rain sensors have different wiring requirements for their receivers. Consult the user
manual for your wireless rain sensor for wiring guidelines.
Removing a Two-Wire Device
If you want to remove a two-wire device, first you must physically disconnect it from the two-wire, and then you
perform a Search operation from the device specific menu in the controller.
Example: If you need to remove a biSensor, physically disconnect the biSensor from the two-wire. Then go to the
controller and turn the dial to the biSensor menu. Perform the steps to search for the biSensor (refer to Searching
for biSensors on page 37). When the controller detects that the biSensor is no longer connected, it will remove the
device from the configuration.
Note: Refer to the Searching for Devices section on page 36 of this manual for the search procedures for the
various two-wire devices.
Page 32