Great Plains 3N-4025P Operator Manual - Manual (Page 26)

22 3N-40P Table of Contents Index Great Plains Manufacturing, Inc.
196-538M Table of Contents Index 2014-01-29
Install Outer Brackets
Start with the left wing.
Refer to Figure 20
1.
Select two:
806-172C U-BOLT 3/4-10 X 10 1/32X11 1/2
From the front of the wing, insert the U-Bolts
through the holes in the outside lug
.
2. Select one:
196-291H 40P WEIGHT BRACKET WLDMNT
and four sets:
804-023C WASHER LOCK SPRING 3/4 PLT
803-027C NUT HEX 3/4-10 PLT
Mount the bracket weldment on the U-Bolts ,
and secure with lock washers and nuts .
3. Select one:
197-062D WEIGHT BRACKET ADJ LEG
and two sets:
802-057C HHCS 5/8-11X2 1/4 GR5
804-019C WASHER FLAT 5/8 USS PLT
804-022C WASHER LOCK SPRING 5/8 PLT
803-021C NUT HEX 5/8-11 PLT
Orient the adjustment leg toward the outside (end of
wing), and secure with bolts , flat washers , lock
washers and nuts .
4. Repeat step 1 through step 3 for the right wing.
Figure 20
Weight Bracket, Outer
20323
1
11
16
17
14
19
12
18
15
13
U
D
L
R
B
F
19
19
1
11
18
15
11 19
18 15
12
13
16
17
14
12
13 16
17 14