Great Plains 3N-4025P Operator Manual - Manual (Page 143)

Great Plains Manufacturing, Inc. Table of Contents Index Maintenance and Lubrication 139
2014-01-29 Table of Contents Index 196-538M
10HD/25P Meter Clean-Out
Refer to Figure 186 (finger meter shown, but step is identical)
1.
Place a bucket or pan under meter to catch any seed
during clean-out.
2. Slide the retaining ring up and remove the seed
hose.
Refer to Figure 187
3.
Pull clean-out door away from the opening and allow
seed to fall.
4. Remove the seed meter wheel for thorough cleaning.
See “10HD, 25 Series Meter Removal” on page 79
for more information.
10HD/25P Finger Meter Clean-Out
Refer to Figure 186
1.
Place a bucket or pan under meter to catch any seed
during clean-out.
2. Slide the retaining ring up and remove the seed
hose.
Refer to Figure 188
3.
Pull clean-out door away from the opening and allow
seed to fall.
.eps
100%
Figure 186
Remove Hose Retaining Ring
22883
.eps
100%
Figure 187
Open Clean-out Door
22885
.eps
100%
Figure 188
Finger Meter Clean-out Door
21920