Great Plains DICKEY-john Auto Section Control - Manual (Page 47)

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
TERMINAL STORAGE CAPACITY / 45
TERMINAL STORAGE CAPACITY
All created and imported fields are stored on the Auto Section Control
terminal. Storage capacity is indicated on the Auto Section Control
terminal Main Menu screen.
When full, storage can be cleared or deleted by clearing tasks or deleting
files. Task or files cannot be exported.
TIP: It is recommended that imported and created fields are cleared
after use to avoid the system from running slow.
CLEAR TASK
1. At the Select Task screen on the IntelliAg VT, select the task to be
cleared.
2. Press the Clear Task button.
3. At the Clear Task Coverage screen, verify the correct task is selected.
4. Press the OK button to delete.
IMPORTANT: Deleted tasks cannot be restored.
NOTE: The Clear Task button only
appears for an existing task
stored on the terminal.
Figure 45
Clear Task Coverage Screen
SMITH