Great Plains DICKEY-john Auto Section Control - Manual (Page 35)

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
FIELD PREPARATION / 33
LOAD A TASK
A task must be created or selected first before Auto Section Control will
operate. A task can be created at the Auto Section Control menu on the
IntelliAg virtual terminal or existing tasks established in Task Controller can
be imported using an SD card.
CREATE TASK
1. At the Auto Section Control Main screen, press the Select Task
button.
2. At the Select Task screen, press the New Client button.
3. Press the New Client input box and enter name using the keypad.
4. Press the OK button to accept.
5. Continue to enter New Farm, New Field, and New Task names.
6. Press the Open Task button to select the created task.
Figure 32
Creating a Task
SMITH
PLANTING