Great Plains NTA3007 Operator Manual - Manual (Page 21)

Great Plains Manufacturing, Inc. Table of Contents Index Important Safety Information 17
2012-07-02 Table of Contents Index 166-371M
Danger: Hitch Crushing
On left side of hitch near behind pull bars;
2 total
See “Hitching Tractor to Drill” on page 27.
See “Unfolding Safety Information” on page 34.
See “Lowering/Raising Safety Information” on
page 42.
See “Folding Safety Information” on page 44.
See “Down-Force Safety Information” on page 101.
Warning: Shock Hazard
On base of strobe beacon;
one total
This decal is not separately available. If missing or
damaged, replace entire 833-365C beacon unit.
See “Beacon Operation (NTA907 only)” on page 31
and “Beacon Maintenance (NTA907 only)” on
page 147.
Warning: Overhead Auger (Option)
On outside face of auger arm,
on each end of auger tube;
3 total
See “Remain Clear of Overhead Lines” on page 8 and
“Auger Safety Information” on page 59.
NTA907: 848-523C NTA3007: 848-581C
32422
NTA907: 833-563C NTA3007: n/a
31234
NTA907: 848-413C NTA3007: 818-622C
32422