Great Plains NTA3007 Operator Manual - Manual (Page 15)

Great Plains Manufacturing, Inc. Table of Contents Index Important Safety Information 11
2012-07-02 Table of Contents Index 166-371M
Safety Decals
WarningSafety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decal and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
Reflector: Slow Moving Vehicle (SMV)
At centre of rear caster sub-frame cross-tube;
1 total
See “Transport Safety Information” on page 50.
Reflectors: Fluorescent Panels
panels: one each tongue draw bar,
panels and triangles: one each corner, rear mainframe;
4 panels and 2 triangles total
See “Transport Safety Information” on page 50.
NTA907: n/a
(International models use
833-398C panels and
833-399C reflectors)
NTA3007: 818-055C
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
32439
NTA907: 833-398C NTA3007: n/a
(North American models use
818-055C SMV reflectors,
838-266C red reflectors &
838-267C amber reflectors.)
Reflectors: Red Triangle
NTA907: 833-399C NTA3007: n/a
(North American models use
818-055C SMV reflectors,
838-266C red reflectors &
838-267C amber reflectors.)
32422