Great Plains NTA3007 Operator Manual User Manual
Operator manual, Manufacturing, inc
Manufacturing, Inc.
© Copyright 2011
Printed 2012-07-02
166-371M
EN
ORIGINAL INSTRUCTIONS
Operator Manual
2012+ NTA907 or NTA3007
9 Meter/30 Foot No-Till Air Drills
Read the Operator manual entirely. When you see this symbol, the
subsequent instructions and warnings are serious - follow without
exception. Your life and the lives of others depend on it!
Illustrations may show optional equipment not supplied with standard unit, and may
show model NTA907, NTA907HD, NTA3007 or NTA3007HD air drills.
32440
This manual is related to the following products:
Table of contents
Document Outline
- Operator Manual
- Table of Contents
- Equipment Identification
- Introduction
- Important Safety Information
- Look for Safety Symbol
- Be Aware of Signal Words
- Prepare for Emergencies
- Be Familiar with Safety Decals
- Wear Protective Equipment
- Use A Safety Chain
- Avoid High Pressure Fluids
- Handle Chemicals Properly
- Confined Space
- Tire Safety
- Use Safety Lights and Devices
- Keep Riders Off Machinery
- Remain Clear of Overhead Lines
- Transport Machinery Safely
- Shutdown and Storage
- Practice Safe Maintenance
- Safety At All Times
- Safety Decals
- WarningSafety Reflectors and Decals
- Reflector: Slow Moving Vehicle (SMV)
- Reflectors: Fluorescent Panels
- Reflectors: Red Triangle
- Reflectors: Amber
- Reflectors: Red
- Reflectors: Daytime
- Transport: Warning: Speed
- Transport: Warning: Speed
- Transport: Warning: Clearance
- Transport: Caution: Towing
- Transport: Road/Field
- Transport: Road
- Transport: Field
- Danger: Electrocution, Marker (Option)
- Danger: Electrocution, Auger (Option)
- Danger: Missing Guard (Option)
- Danger: Rotating Auger (Option)
- Danger: Do Not Ride
- Danger: Read Manual
- Danger: Electrocution
- Danger: Chemicals
- Danger: Hitch Crushing
- Warning: Shock Hazard
- Warning: Overhead Auger (Option)
- Warning: Fan Hazard
- Warning: Moving Chain
- Warning: Moving Chain
- Warning: Moving Chain (Option)
- Warning: Wear Eye Protection
- Warning: Pinch Point
- Warning: Pinch Point
- Warning: Pinch Point
- Danger: Marker Pinch/Crush (Option)
- Warning: Overhead Marker (Option)
- Warning: High Pressure Fluid (Option)
- Warning: High Pressure Fluid
- Warning: Confined Space
- Warning: Moving Gears
- Warning: Falling Hazard
- Warning: Pinch Point
- Warning: Pinch Point, Auger (Option)
- Warning: Roll-Away
- Warning: Unexpected Movement
- Caution: Tire Pressure and Torque
- Caution: Tire Pressure and Torque
- Caution: TyreTire Pressure and Torque
- Caution: Tires Not A Step
- Preparation and Setup
- Operating Instructions
- Pre-Start Checklist
- Unfolding the Drill
- Lowering and Raising Drill
- Folding the Drill
- Transporting the Air Drill
- Brake Operation (Option)
- Ladder Operations
- Hopper Lids
- Meter Doors
- Auger Operations (Option)
- Loading Materials
- Collection Chute Operation
- Calibration Crank
- Fan Operation
- Marker Operation (Option)
- Field Operations
- Field Operation
- Unloading Materials
- Parking
- Storage
- Adjustments
- Adjustments Summary
- Setting Material Rates
- Meter Calibration
- Contact Drive Adjustment
- Fan Speed Adjustments
- Implement Lift Switch Adjustment
- Planting Depth Adjustments
- Opener Down-Force (Hydraulic)
- Opener Sub-Frame Adjustment
- Frame-Mounted Coulters (Option)
- 07 Series Row Unit Adjustments
- Marker Adjustments
- Troubleshooting
- Maintenance and Lubrication
- Maintenance
- Chain Maintenance
- Material Clean-Out
- Hydraulic Maintenance
- Marker Maintenance
- Brake Maintenance (Option)
- Brake Line Charge and Bleed
- Drain Hydraulic Brake Lines
- Charge and Bleed Brake System
- Air Brake Maintenance
- Reservoir Draining
- Air Brake Filter Cleaning
- Brake Drum and Liner Maintenance
- Recommended Work Practices
- Procedures for Servicing Brakes
- Brake Shoe Replacement
- Install New Brake Shoes
- Re-Install Springs
- Brake Drum Maintenance
- Brake Drum Resurfacing
- Re-Mount Hub and Drum
- Mounting Wheels
- Test and Adjust Brakes
- Levelling Drill
- Section Alignment
- Seed Flap Replacement
- Beacon Maintenance (NTA907 only)
- Lubrication and Scheduled Maintenance
- Caster Wheel Pivots
- Tongue Pivots
- Coulter Pivots (Option)
- Marker(s) (Option)
- Wing Flex Pivots
- Wing Fold Pivots
- Opener Wing Frame Tilt Pivots
- Opener Frame Parallel Arms
- Marker Hinges (Option)
- Tire Pressures
- Tongue Lock Roller
- Transport Hook Rollers
- Hopper Lid Pivot bar and Clamps
- Meter Box Door Clamps
- Auger Storage Clamps
- Auger Swing Arm: Mount Pivot
- Auger Swing Arm: Mid-Pivot
- Auger Swing Arm: Outer Pivot
- Auger Swing Arm: Tilt Pivot
- Contact Drive/Gearbox Input Chains
- Gearbox Output/Meter Input Chains
- Caster Stabiliser Brakes
- Coulter Hubs (Option)
- Hopper Lid Seals
- Meter Door Seals
- Wheel Bearings, Main Transport Wheels
- Wheel Bearings, Wing Gauge
- Maintenance
- Options
- Appendix A - Reference Information
- Appendix B - Initial Setup
- Appendix C - Option Installation
- Index