Great Plains YP4025A Operator Manual - Manual (Page 60)

56 YP4025A Table of Contents Index Great Plains Manufacturing, Inc.
401-627M Table of Contents Index 2013-04-24
Short-Term Parking
1. Fold markers. See “Folding the Markers” on
page 55.
2. Choose a location with level firm ground. Do not
unhitch on a slope.
3. Raise the planter.See “Raising Planter” on page 28.
4. Fold the planter (optional). See “Folding the
YP4025A Planter” on page 30.
5. Block tires.
6. Re-install the parking stand (“Hitching Tractor to
Planter” on page 16).
Refer to Figure 62 (shown without tractor for clarity)
7.
For the standard 3-point hitch, deploy the two
forward stands
. Remove the inner pin , swing
the stand out, down and vertical around the
bottom pin , and re-insert the pin at .
For hydraulic hitch planters, adjust hitch cylinder to
relieve weight from draw-bar.
8. Insert transport locks on all lift cylinders.
9. Disconnect hydraulic lines. Secure them so that they
do not touch the ground.
10. Disconnect electrical cables, capping where
provisioned.
Figure 62
Deploying 3-Point Stands
26034
7
4
6
5 5
5 4
5
6 7