Great Plains YP4025A Operator Manual - Manual (Page 27)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 23
2013-04-24 Table of Contents Index 401-627M
Marker Setup
Prior to first use, check and adjust:
• “Dual Marker Speed Adjustment” on page 166.
Prior to first use, and whenever changing row spacings,
set or reset:
• “Marker Extension” on page 167.
Prior to each planting session, check and adjust:
• “Marker Disk Adjustment” on page 62.
Lock Up Fertilizer Drive
YP4025A serial number B1026H+
Loss of Control and Sharp Object/Crushing Hazards:
Do not lift or lower wheel by spoke or rim; use handle only.
Keep feet out from under wheel. 90 pounds (41 kg.) force is
required to lift wheel. If you lose your grip before pinning, or
after unpinning, the arm snaps down rapidly. The traction
teeth and the force of the wheel impact can inflict serious
injury.
The liquid fertilizer option uses a piston pump driven by a
ground contact wheel. When not using the fertilizer drive,
preserve the pump by locking up the ground wheel. On
older models remove the chain.
Note: Do not operate planter pump when not applying
material.
Refer to Figure 14
For YP4025A planters:
5. Remove clevis pin from storage hole .
6. Release the lock arm , lift handle to lift ground
wheel up to position it in-between lock arm.
7. Secure with pin clevis and cotter pin.
Figure 14
Locked Up Fertilizer Drive
32364
5
7
6
4
4
5 7
6