Electrical hookup, Hitching with 3-point – Great Plains YP4025A Operator Manual User Manual
Page 22
18
YP4025A
Great Plains Manufacturing, Inc.
401-627M
2013-04-24
Electrical Hookup
Refer to Figure 5
Make sure tractor is shut down with accessory power off
before making connections.
1.
Mate lighting connector to tractor outlet.
2.
Mate monitor connector to tractor harness.
3.
Row-Pro™ or Swath Command™ compressor
(option).
4.
Mate any optional or aftermarket electrical
connectors.
Make connections prior to planter movement. Some
planter hydraulic circuits are under monitor control.
Hitching with 3-Point
Refer to Figure 6
1.
If the planter is model YP4025A-3215 (“Even Row
15in”), check the configuration of the hitch offset at
“YP4025A-3215 3-Point Hitch” on page 169.
2.
Connect your tractor 3-point to the planter 3-point
hitch. If using quick hitch be sure planter locks into
hitch securely.
3.
Raise tractor 3-point enough to relieve pressure from
parking stands.
Load Sway Hazard:
Adjust 3-point hitch arms and sway blocks to minimize any
side-to-side sway to assure proper tracking in the field, and
safe road travel.
Figure 5
Connector Identification
25236
25237
1
2
3
Figure 6
3-Point Hitch
29242