Great Plains YP4025A Operator Manual - Manual (Page 13)

Great Plains Manufacturing, Inc. Table of Contents Index Important Safety Information 9
2013-04-24 Table of Contents Index 401-627M
818-045C
Warning: Pinch/Crush
On front faces of rockshaft, above gauge wheels,
On inside and outside face, wing caster weldments,
On side face of rear axle weldment;
eight total
818-188C
Warning: Speed
On front of center section, one total
29164
29164
818-188C Rev. C
Do Not exceed 20 mph maximum transport
speed. Loss of vehicle control and/or machine
can result.
To Prevent Serious Injury or Death:
EXCESSIVE SPEED HAZARD
WARNING