Great Plains YP4025A Operator Manual - Manual (Page 137)

Great Plains Manufacturing, Inc. Table of Contents Index Options 133
2013-04-24 Table of Contents Index 401-627M
Ground Drive Fertilizer Pump
One pump kit integrates with the Type 2 fertilizer
manifold system. The pump mounts on a wing tool bar,
and requires a planter with a 35cm (13.8in) or greater
single-row spacing, or a twin-row spacing.
Note: This pump is incompatible with 10in, 8in and 7.5in
row spacings.
This is the pump for use with the 400 gallon tank on the
PFC2000 tank cart. Point-row operations are not
supported. The pump operates whenever the row units
are lowered and in motion. For operations, see the Seed
Rate manual.
Type 2 Fertilizer Manifold
The Type 2 system includes all plumbing from the rows,
through the planter-mounted ground drive pump, and to
the on-board 2x200 gallon tanks.
The 407-243A kit extends the inlet to the rear hitch for
use with a cart, rather than with on-board tanks.
The wing boom systems are separate for each wing
The system does not include, and requires:
• a pump (order the 407-213A Ground Drive pump,
page 133)
• a tank system, such as the 407-244A on-board 2x200
gallon tanks (page 132), or the single 400 gallon tank
of the PFC2000 cart (page 132).
• a trailer hitch weldment, 401-467A (page 130), if a cart
is used.
Option Packages Part Number
Ground Drive Fertilizer Pump Kit 407-213A
Description Initial Order
Type 2 Fertilizer Manifold Kit 407-239A
Type 2 Boom Cart Hookup 407-243A
28416
29308