Great Plains TSF1260 Operator Manual - Manual (Page 12)

8 TSF1060 and TSF1260 Great Plains Manufacturing, Inc.
500-642M 01/12/2012
Safety Decals
Safety Reflectors and Decals
Your sprayer comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your sprayer.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Slow Moving Vehicle Reflector
818-055C
Middle rear of center section;
1 total
Red Reflectors
838-266C
On the rear outside corners of boom frame;
2 total
20410
20441