Wheatheart X Series 13 Augers - Manual (Page 77)

W HEATHEART - X13 S ERIES A UGERS 4. T RANSPORT
X1374, X1384, X1394 4.1. T RANSPORT P ROCEDURE
30787 R1 77
4. Transport
4.1. TRANSPORT PROCEDURE
This auger is designed to be transported and operated without unhitching unit
from tractor.
1. Place auger in full down position.
• Disconnect PTO driveline from tractor.
• Seat roller track shoe against the upper trackstop with slight tension on
the lift cable.
2. Fully retract wheel axles. Jack up each wheel in turn, and secure axles with
axle pin and snap pin. See Figure 4.1 for jack lug and axle pin locations.
WARNING Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
DANGER
Electrocution hazard:
• This auger is not insulated.
• Keep auger away from overhead power
lines and devices.
• Electrocution can occur without direct
contact.
• Fully lower auger before moving.
Electrocution will result in serious injury or
death.
CAUTION
Always tow auger in the lowered position.
Disconnect PTO driveline from tractor for
transport and placement.