Wheatheart X Series 13 Augers - Manual (Page 53)

W HEATHEART - X13 S ERIES A UGERS 3. A SSEMBLY
X1374, X1384, X1394 3.11. A SSEMBLE THE A UGER F RAME
30787 R1 53
9. Lift the bowtie into place, and bolt it to the lower scissors with eight

5/8'' x 2'' bolts and 5/8'' locknuts per side. A steel punch may be necessary to
align bolt holes.
10. Install the bow tie cross-brace using four 1/2'' x 1-1/2'' bolts and 1/2''
locknuts.
Figure 3.21 Installing the Bowtie and Bowtie Cross-Brace
1/2” X 1-1/2” BOLT
5/8” LOCKNUTS
1/2” LOCKNUT
5/8” X 2” BOLTS
1/2” X 1-1/2”
1/2” LOCKNUT
BOWTIE
BOWTIE
CROSS BRACE
BOLT